Advantages of the hottest highlight traceless inje

Advantages of high gloss traceless injection mold warmer

advantages of high gloss traceless injection mold warmer:

① eliminate the dissolving line, dissolving mark, ripple and silver thread on the product surface

② completely solve the surface shrinkage of plastic products

③ improving the surface finish of the product depends on the speed and explosive force of the aircraft, so that the surface finish can reach the mirror

④ omit the application for safety certificate and pipeline engineering of complex boiler equipment and high-pressure equipment

⑤ the product does not need painting and subsequent processing, which improves the yield%

⑥ solve the floating weaving phenomenon of woven products, make the quality more perfect, make thin-wall molding improve the injection fluidity, improve the product quality and strength, and reduce the injection cycle of thick wall molding by more than 60%

high gloss traceless injection mold warming machine features:

① 7-inch LCD true color LCD display (optional), touch Chinese digital input, full Chinese interface, simple operation

② the full closed-loop system controls the detection of input and output temperature, feeds back the PLC with the actual temperature of the mold, and displays the changes of the digital color map to ensure the accuracy and stability of the output. In the 12 months when Simon storer was the chief executive officer of the British polyurethane rigid foam Association,

③ six alarms of high-temperature steam or high-temperature hot water, cold water, air temperature and pressure were interlocked with injection molding machine signals with time and action

④ the whole machine adopts components imported from Europe and America

⑤ single and dual mold temperature detection (optional), input and output pipes adopt stainless steel pipes, and multiple groups of input and output interfaces

⑥ the whole machine is equipped with heating, cooling and cold heat conversion control functions

⑦ recovery system of high-temperature hot water and cooling water

in ordinary injection molding processing, setting the mold temperature low when the summit is hosted by the Nanjing Municipal People's government can shorten the molding cycle, but it is easy to produce convergence lines, resulting in poor appearance quality. On the contrary, setting the mold temperature high can improve the appearance quality of the product surface, but it is easy to produce warpage, subsidence, poor size, etc., while prolonging the forming cycle and increasing the cost

high gloss steam injection molding technology can solve the above two problems at the same time. It uses the steam and cooling water produced by the steam furnace to control the temperature of the mold in a molding cycle, so that the advantages of the above two methods can be brought into play

first, spray steam before injection to make the temperature of the mold exceed the temperature of thermal deformation of the resin, and then inject molten resin, which will form a molded product with good surface quality without manifold. After the injection of molten resin is completed, the cooling process begins. Use cooling water to quickly reduce the mold temperature below the temperature of resin thermal deformation. In this way, the curing speed of the resin can be accelerated to shorten the molding cycle and solve the problems such as warpage and subsidence

high gloss steam injection molding can eliminate the dissolving line, dissolving mark, ripple and silver line on the product surface, completely solve the surface shrinkage of plastic products, and make the surface finish of products reach the mirror level. The product does not need the subsequent processing of spraying, which effectively reduces the cost and shortens the delivery time. In addition, high gloss injection molding can also solve the floating fiber phenomenon caused by fiber added products, so as to make the product quality more perfect. In thin-wall molding, high gloss injection molding helps to improve the fluidity of injection molding and improve the quality and strength of products. It can also reduce the injection cycle of thick wall molding by more than 70%

Kehui's high light speed cold speed hot mold temperature machine has 8-inch LCD true color Siemens LCD display, touch Chinese digital input, all Chinese interface, and simple operation. The full closed-loop system controls the detection of input and output temperature, feeds back the PLC with the actual temperature of the mold, and displays the changes of the color chart to ensure the accuracy and stability of the output. Steam, cold water, and mold temperature display are interlocked with injection molding machine signals with time and action

Kehui's newly developed high light mold temperature machine has three types of models suitable for injection molding machines of 600-800 tons, 300-500 tons and less than 300 tons. The biggest feature is that it does not use boiler equipment. The whole machine is equipped with high-temperature water heaters and freezers, and has added hot water and cooling water recovery systems. Compared with imported machines introduced into the market at present, calculated with 600 tons of injection molding machines, 1160 kwh of electricity can be saved per day (calculated according to 20 hours/day), It can save 12 tons of water (calculated by 20 hours/day). Compared with using boiler steam heating, the annual cost savings are more than 170000 yuan, with remarkable energy-saving effect and considerable profits. This is the advantage of Kehui high light mode temperature machine

in addition to flat-panel TV panels, this technology can also be widely used in computer LCD, air conditioning, automotive interior parts and other household appliances, automotive, communications, medical and other industries